# Non-Planar Coil Winding Angle Optimization for Compatibility with Non-Insulated High-Temperature Superconducting Magnets

Preprint · Carlos Paz-Soldan

- Archive id: arxiv:2003.02154
- Published: 2020-03-03
- DOI: https://doi.org/10.1017/s0022377820001208
- arXiv: https://arxiv.org/abs/2003.02154
- Source URL: https://arxiv.org/abs/2003.02154
- PDF: https://arxiv.org/pdf/2003.02154
- Provenance: arxiv

## Abstract

The rapidly emerging technology of high-temperature superconductors (HTS) opens new opportunities for the development of non-planar non-insulated HTS magnets. This type of HTS magnet offers attractive features via its simplicity, robustness, and is well-suited for modest size steady-state applications such as a mid-scale stellarator. In non-planar coil applications the HTS tape may be subject to severe minor-axis bending strain ($ε\_{bend}$), torsional strains ($ε\_{tor}$) and transverse magnetic field components ($B\_\\perp$), all of which can limit the magnet operating space. A novel method of winding angle optimization is here presented to overcome these limitations. Essentially, this method: 1) calculates the peak εbend and B\\perp for arbitary winding angle along an input coil filamentary trajectory, 2) defines a cost function including both, and then 3) uses tensioned splines to define a winding angle that reduces $ε$tor and optimizes the εbend and $B\_\\perp$ cost function. As strain limits are present even without $B\_\\perp$, this optimization is able to provide an assessment of the minimimum buildable size of an arbitrary non-planar non-insulating HTS coil. This optimization finds that for standard 4 mm wide HTS tapes the minimum size coils of the existing HSX, NCSX, and W7-X stellarator geometries are around 0.3 - 0.5 m in radius. For coils larger than this size, permitting a finite (yet tolerable) strain allows reduction of $B\_\\perp$. This enables a reduction of the HTS tape length required to achieve a given design magnetic field or equivalently an increase in the achievable magnetic field for fixed HTS tape length. The distinct considerations for optimizing a stellarator coilset to further ease compatibility with non-insulated HTS magnets are also discussed.

_Abstract reproduced under CC0-1.0 (arXiv descriptive metadata)._

---
Space Kitty Archive · https://space-kitty.com · API: https://space-kitty.com/api/v1 · MCP: https://space-kitty.com/mcp · Premium: $0.20/request via x402 (Base Sepolia (testnet)). Metadata: arXiv (CC0), OpenAlex (CC0), Europe PMC (CC BY/CC0 works), ClinicalTrials.gov.