# Characteristics of Pumping Current in a YBCO Coil by a Pulse-Type Magnetic Flux Pump

Preprint · Zhiming Bai, Xinhui Cui, Chi Ma

- Archive id: arxiv:2008.12941
- Published: 2020-08-29
- DOI: https://doi.org/10.1109/tasc.2021.3071539
- arXiv: https://arxiv.org/abs/2008.12941
- Source URL: https://arxiv.org/abs/2008.12941
- PDF: https://arxiv.org/pdf/2008.12941
- Provenance: arxiv

## Abstract

2G high temperature superconducting (HTS) wires, YBCO coated conductors, perform a better carrying current capability, which is potentially applied in the manufacture of HTS magnets. This paper presents the experimental results of the pumping current for YBCO coils using a pulse-type magnetic flux pump in the conduction-cooling system and liquid nitrogen bath (LN2) cryogenic environment. Optimization of the flux pump used in the conduction-cooling system is that a constantan heater was added to keep the temperature of the pumping bridge at a certain value. Excitation effects of the YBCO coil at different temperatures were investigated in the conduction-cooling system. A fast-increasing of pumping current in the YBCO coil occurs when the temperature of the YBCO sheet (i.e., pumping bridge) is in the range of 50 K to 80 K. The relationships between saturated pumping current and input voltage, working frequency, numbers of magnetic poles were also studied. Using the seven-pole configuration, the saturated current can reach 155 A when the frequency is 20 Hz and the voltage is 6 V. The excitation characteristics of the flux pump in the LN2 cooling system show the possibility of the pulse-type magnetic flux pump for the practical application of HTS magnets.

_Abstract reproduced under CC0-1.0 (arXiv descriptive metadata)._

---
Space Kitty Archive · https://space-kitty.com · API: https://space-kitty.com/api/v1 · MCP: https://space-kitty.com/mcp · Premium: $0.20/request via x402 (Base Sepolia (testnet)). Metadata: arXiv (CC0), OpenAlex (CC0), Europe PMC (CC BY/CC0 works), ClinicalTrials.gov.