# Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Preprint · G. Ciovati, J. Anderson, S. Balachandran, G. Cheng, B. Coriton, E. Daly, P. Dhakal, A. Gurevich, F. Hannon, K. Harding, L. Holland, F. Marhauser, K. McLaughlin, D. Packard, T. Powers, U. Pudasaini, J. Rathke, R. Rimmer, T. Schultheiss, H. Vennekate, D. Vollmer

- Archive id: arxiv:2302.07201
- Published: 2023-02-14
- Venue: Phys. Rev. Accel. Beams 26, 044701 (2023)
- DOI: https://doi.org/10.1103/physrevaccelbeams.26.044701
- arXiv: https://arxiv.org/abs/2302.07201
- Source URL: https://arxiv.org/abs/2302.07201
- PDF: https://arxiv.org/pdf/2302.07201
- Provenance: arxiv

## Abstract

The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$\_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\\sim 3$ $μ$m thick Nb$\_3$Sn film on the inner surface, deposited on a $\\sim4$ mm thick bulk Nb substrate and a bulk $\\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

_Abstract reproduced under CC0-1.0 (arXiv descriptive metadata)._

---
Space Kitty Archive · https://space-kitty.com · API: https://space-kitty.com/api/v1 · MCP: https://space-kitty.com/mcp · Premium: $0.20/request via x402 (Base Sepolia (testnet)). Metadata: arXiv (CC0), OpenAlex (CC0), Europe PMC (CC BY/CC0 works), ClinicalTrials.gov.