# Overcoming Discharge Inhibition in n-Butane Oxidation: Two-Component BaTiO3 and Mn-Cu Mixed Oxide Coatings

Preprint · Timothy Oppotsch, Christian Oberste-Beulmann, Alexander Böddecker, Gerrit Hübner, Ihor Korolov, Peter Awakowicz, Martin Muhler

- Archive id: arxiv:2504.08998
- Published: 2025-04-11
- arXiv: https://arxiv.org/abs/2504.08998
- Source URL: https://arxiv.org/abs/2504.08998
- PDF: https://arxiv.org/pdf/2504.08998
- Provenance: arxiv

## Abstract

A twin surface dielectric barrier discharge on the microsecond scale was used in combination with a two-component coating to oxidize 300 ppm n-butane as a model volatile organic compound to CO2 and H2O in synthetic air at room temperature and at 160 °C. The integration of BaTiO3 as a base material for the coating allowed the successful use of otherwise discharge-ignition-inhibiting materials such as MnO2-CuO applied as a full coating. Application of pure BaTiO3 led to highly porous coatings that do not hinder the discharge ignition and show a negligible influence on n-butane conversion while reducing byproduct formation. Thus, BaTiO3 was identified as a suitable structure-directing agent in two-component coatings, using 1:1 and 1:2 ratios of BaTiO3:catalyst coatings. Coated electrode configurations were compared to their respective uncoated state to highlight the coating-induced changes. The two-component coatings strongly increased the CO2 selectivity, reaching a maximum of 91.6 % at an energy density of 450 J/L and 160 °C for the 1:2 ratio, corresponding to an increase of 51.0 % relative to the uncoated electrode.

_Abstract reproduced under CC0-1.0 (arXiv descriptive metadata)._

---
Space Kitty Archive · https://space-kitty.com · API: https://space-kitty.com/api/v1 · MCP: https://space-kitty.com/mcp · Premium: $0.20/request via x402 (Base Sepolia (testnet)). Metadata: arXiv (CC0), OpenAlex (CC0), Europe PMC (CC BY/CC0 works), ClinicalTrials.gov.