# A Non-planar ReBCO Test Coil with 3D-printed Aluminum Support Structure for the EPOS Stellarator

Preprint · Paul Huslage, Tristan Schuler, Pedro F. Gil, Vitali Brack, Dylan Schmeling, Diego A. R. Orona, Elisabeth von Schoenberg, Timo Thun, Jason. Smoniewski, Eve V. Stenson

- Archive id: arxiv:2505.08488
- Published: 2025-05-13
- arXiv: https://arxiv.org/abs/2505.08488
- Source URL: https://arxiv.org/abs/2505.08488
- PDF: https://arxiv.org/pdf/2505.08488
- Provenance: arxiv

## Abstract

We report on the test of a small scale, non-planar coil using non-insulated ReBCO tape wound on a 3D-printed aluminum support structure. A 3D-scan of the winding frame which was printed out of AlSi10Mg using selective laser melting, showed peak manufacturing deviations of 0.3 mm. We tested the coil with 21 turns of 3 mm wide tape cooled both by liquid nitrogen and with a cryocooler. We achieved a central field strength of up to 21 mT which agrees with the prediction suggesting that we manufactured the coil without defects. The peak field was reached at a supply current of 120 A. The current leads showed a contact resistance of $\\left(2.25\\pm0.13\\right)μΩ$. The discharge time $L/R$ was found to be 0.63 s in liquid nitrogen and 2.92 s when cooled by the cryocooler. From this we estimate a winding pack temperature of 41 K.

_Abstract reproduced under CC0-1.0 (arXiv descriptive metadata)._

---
Space Kitty Archive · https://space-kitty.com · API: https://space-kitty.com/api/v1 · MCP: https://space-kitty.com/mcp · Premium: $0.20/request via x402 (Base Sepolia (testnet)). Metadata: arXiv (CC0), OpenAlex (CC0), Europe PMC (CC BY/CC0 works), ClinicalTrials.gov.