A single-sided linear synchronous motor with a high temperature superconducting coil as the excitation system

Abstract

Thrust measurements were performed on a coil made of YBa2Cu3O7-d coated conductor acting as the excitation system of a single-sided linear synchronous motor. The superconducting coil was a single pancake in the shape of a racetrack with 100 turns, the width and effective lengths were 42 mm and 84 mm, respectively. The stator was made of conventional copper wire. At 77 K and a gap of 10 mm, with an operating direct current of I_DC=30 A for the superconducting coil and alternating current of I_AC=9 A for the stator coils, thrust of 24 N was achieved. With addition of an iron core, thrust was increased by 49%. With addition of an iron back plate, thrust was increased by 70%.

Abstract: arXiv descriptive metadata (CC0). Thank you to arXiv for use of its open access interoperability. This service was not reviewed or approved by, nor does it necessarily express or reflect the policies or opinions of, arXiv.