Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation

Abstract

Future particle accelerators such as the the SLAC ``Linac Coherent Light Source-II'' (LCLS-II) and the proposed Cornell Energy Recovery Linac (ERL) require hundreds of superconducting radio-frequency (SRF) cavities operating in continuous wave (CW) mode. In order to achieve economic feasibility of projects such as these, the cavities must achieve a very high intrinsic quality factor ($Q_0$) to keep cryogenic losses within feasible limits. To reach these high $Q_0$'s in the case of LCLS-II, nitrogen-doping has been proposed as a cavity preparation technique. When dealing with $Q_0$'s greater than 1\e{10}, the effects of ambient magnetic field on $Q_0$ become significant. Here we show that the sensitivity to RF losses from trapped magnetic field in a cavity's walls is strongly dependent on the cavity preparation. Specifically, standard electropolished and 120$^\circ$C baked cavities show a residual resistance sensitivity to trapped magnetic flux of $\sim0.6$ and $\sim0.8$ n$Ω$/mG trapped, respectively, while nitrogen-doped cavities show a sensitivity of $\sim$ 1 to 5 n$Ω$/mG trapped. We show that this difference in sensitivities is directly related to the mean free path of the RF surface layer of the niobium: shorter mean free paths lead to less residual resistance sensitivity to trapped magnetic flux in the dirty limit ($\ell<<ξ_0$) while longer mean free paths lead to lower sensitivity in the clean limit ($\ell>>ξ_0$). These experimental results are also shown to have good agreement with recent theoretical predictions for pinned vortex lines oscillating in RF fields.

Abstract: arXiv descriptive metadata (CC0). Thank you to arXiv for use of its open access interoperability. This service was not reviewed or approved by, nor does it necessarily express or reflect the policies or opinions of, arXiv.