Trapping a magnetic field of 14.8 T using stacked coated conductors of 12 mm width

Abstract

We fabricated a compact (13$\times$12$\times$12.5 mm${^3}$) trapped-field magnet by stacking 200 pieces of EuBa${_2}$Cu${_3}$O${_7}$ coated conductors with BaHfO${_3}$ nanorods as artificial pinning centers. It was magnetized by field-cooling method using a 18 T superconducting magnet, and the maximum field of 14.8 T was trapped at 10 K at a field-ramp rate of 0.1 T/min. At higher temperatures, although the trapped field was decreased, we could trap the field with much faster ramp rate. In order to understand these results, we also performed calculations of the trapped field based on $J_\mathrm{c}-H$ characteristics of the coated conductor. The calculated trapped field value was larger than the experimental value at 10 K. This discrepancy can be understood by considering the reduction of the effective size of the stacked coated conductors due to the existence of extended regions of irregular flux penetration called "flux jets".

Abstract: arXiv descriptive metadata (CC0). Thank you to arXiv for use of its open access interoperability. This service was not reviewed or approved by, nor does it necessarily express or reflect the policies or opinions of, arXiv.