Minimum Quench Energy Of Nb$_3$Sn Wires With High Specific Heat Tape

Abstract

A major problem of state-of-the-art Nb$_3$Sn accelerator magnets is their long training due to thermo-mechanical perturbations. Increasing the specific heat, $C_p$, of the Rutherford cable would reduce and/or eliminate training by limiting the coils temperature rise. This paper studies feasibility of increasing the $C_p$ of Rutherford-type cables by using thin composite Cu/$Gd_2$O$_3$ and Cu/$Gd_2$O$_2$S tapes produced by Hyper Tech Research, Inc. The tape can be either wrapped around the cable, placed on the cable wide faces under the insulation, and/or inserted as a core. Wire samples outfitted with these high-$C_p$ ribbons, or tapes, were prepared and tested at FNAL for their Minimum Quench Energy (MQE). At 90%I$_c$ and 15 T, the average gain of MQE of the Nb$_3$Sn wire soldered to the Cu/$Gd_2$O$_2$S 55 micrometer thick ribbon was 2.5, and further increased at larger transport currents.

Abstract: arXiv descriptive metadata (CC0). Thank you to arXiv for use of its open access interoperability. This service was not reviewed or approved by, nor does it necessarily express or reflect the policies or opinions of, arXiv.