Amplifier scheme: driven by indirect-drive under 10 MJ laser toward inertial fusion energy

Abstract

Burn efficiency is a key for commercial feasibility of fusion power station for inertial fusion energy, while burn efficiency is usually lower than 30% in the central ignition scheme of inertial confinement fusion (ICF). A recent conceptual design for a 10 MJ laser driver [Z. Sui and K. Lan et al., Matter Radiat. Extremes 9, 043002 (2024)] provides a new room for target design to achieve a higher burn efficiency. Here, we take the advantage of fuel density in reaction rate and propose a novel amplifier scheme for increasing burn efficiency via two cascading explosions by ICF. The amplifier scheme can be realized either by indirect-drive or by direct-drive. Here, we give a 1D design for an indirect-driven amplifier capsule containing 2.02 mg DT fuel under a 300 eV radiation generated by a 10 MJ and 1785 TW laser inside an octahedral spherical hohlraum. As a result, the amplifier capsule has a burn efficiency of 48% and a gain of 33 at a convergence ratio of 24. This novel scheme can achieve a relatively high burn efficiency at a relatively low convergence ratio, which can greatly relax the stringent requirements of high gain fusion on hot spot ignition conditions and engineering issues.

Abstract: arXiv descriptive metadata (CC0). Thank you to arXiv for use of its open access interoperability. This service was not reviewed or approved by, nor does it necessarily express or reflect the policies or opinions of, arXiv.