Experimental Results from Early Non-Planar NI-HTS Magnet Prototypes for the Columbia Stellarator eXperiment (CSX)

Abstract

The Columbia Stellarator eXperiment (CSX) is an upgrade of the Columbia Non-neutral Torus (CNT) that aims to demonstrate a university-scale, quasi-axisymmetric stellarator using high-temperature superconducting (HTS) technology at an on-axis magnetic field target of 0.5 T. Due to the strain sensitivity of ReBCO (Rare-earth Barium Copper Oxides), adapting it to non-planar stellarator geometries requires new winding, structural, and cooling strategies. We report on the results of a staged prototype program (P1, P2, P3) employing 3D-printed, sectional aluminum coil frames with winding channels, gimballed constant-tension winding mechanics, and solder potting for radial current redistribution and passive quench mitigation. The first prototype, P1 (planar elliptical, double-pancake) tested additive manufacture, sectional joining and baseline winding, achieving predicted fields at 77 K. P2 (non-planar, higher strain) was wound to 42 turns, energized at 30-40 K to produce expected magnetic fields, and studied thermal gradients and resistance at up to 4.5 kAt. Design evolution in P3 introduces concave geometry with dual double-pancakes, 200 turns, and approaches the 70 kAt target at 20 K. In parallel, sub-microhm lap joints have been developed. Together, these results de-risk manufacturing, cooling interfaces, quench management, and diagnostics, paving the way for full-size non-planar HTS stellarator coils for CSX.

Abstract: arXiv descriptive metadata (CC0). Thank you to arXiv for use of its open access interoperability. This service was not reviewed or approved by, nor does it necessarily express or reflect the policies or opinions of, arXiv.