Efficient Mode Conversion at 1064 nm via Bilayer Inverse Taper on Thin-Film Lithium Niobate

Abstract

Efficient fiber-to-chip coupling remains challenging for thin-film lithium niobate (TFLN) devices operating at 1064 nm. Here, we fabricate and characterize an on-chip optical mode converter based on a bilayer inverse taper. The proposed structure demonstrated a coupling loss of 1.9 dB per facet for the TE mode, with a 1 dB bandwidth spanning 1055--1085 nm. The polarization-dependent alignment tolerance was measured along the lateral and vertical directions. Theoretical and simulation analyses indicate that, when using a lensed fiber with a mode field diameter of 2.5 $μ$m, the coupling loss can be reduced to as low as 0.48 dB per facet. These results demonstrate the feasibility of providing a high-efficiency solution for on-chip optical coupling at 1064 nm.

Abstract: arXiv descriptive metadata (CC0). Thank you to arXiv for use of its open access interoperability. This service was not reviewed or approved by, nor does it necessarily express or reflect the policies or opinions of, arXiv.